Intake Mods with a Router

[MR.hp]

The las few months I have been making some changes on intakes and one of them is on a dual plane intake cutting the divider down. Most of the time you have to take it to a machine shop but I have found a cheap and inexpensive way to get this done. You just use an old wood cutting router, now with aluminum you can use the wood cutting bits and it does a great job, but on cast iron I found you need to use a 1/4 double cut burr and it will cut them right down also. Here are a couple I did this year.

[Z28SSMAN]

lol. Where do you come up with this stuff? The only Burr I'm famliar with is Raymond Burr aka Perry Mason. Looks real good. Saves a lot of work

[MR.hp]

lol. Where do you come up with this stuff? The only Burr I'm familiar with is Raymond Burr aka Perry Mason. Looks real good. Saves a lot of work

I find these ideas on youtube, the shops want over $200 to cut that divider down on an intake screw them, they can all go under for all I care. Most shops don't want nothing to do with you unless you are some big NHRA talent fat ass driver who cannot build or tune things on their own.