Spring Call outs!

[speedo]

Maybe you could fab a rear for the Mustang..

Just give chad you other stock 8.8... I am sure he would make up a jig for them fox bodys also, everyone has 2 right??

[torkflight]

Just give chad you other stock 8.8... I am sure he would make up a jig for them fox bodys also, everyone has 2 right??

yep give me a stock one to fixture off of and we are in business

[torkflight]

i am very interested. i would probably do this. how much you thinkin total price?
you're saying 9 inch right. with .....3.73's(i think) posi of coarse

pm me

Sorry missed this one, cant really give you a price until I see what metal and waterjeting this rear is gonna cost, although once I have a fixture built I should be able to put a factory ford nine housing in it and install all the brackets, that would be a bit cheaper but they dont look as cool and wont be as strong, the internals like axles, third member, gears and bearings are gonna be the same price as you can get then for so you might as well start looking for that stuff, I will just sell you the empty housing and do an axle worksheet for it so you can piece it together as your funds permit, Cool???

[speedo]

No I already have a 12 bolt.

He took my stock rearend to get the specs on the factory brackets.

If I am reading Chad right, he is just going to sell you the housing that will be a direct bolt in. You would have to come up with the backing plates, decide if you want to keep the abs or not (if your sensors are in the backing plates if you have 4 channel you should be ok) your going to need a bearing kit, axles, gears and the third member from a 9 inch rearend and then have someone assemble it. Not sure if Chad does assembly or not...?

[torkflight]

No I already have a 12 bolt.

He took my stock rearend to get the specs on the factory brackets.

If I am reading Chad right, he is just going to sell you the housing that will be a direct bolt in. You would have to come up with the backing plates, decide if you want to keep the abs or not (if your sensors are in the backing plates if you have 4 channel you should be ok) your going to need a bearing kit, axles, gears and the third member from a 9 inch rearend and then have someone assemble it. Not sure if Chad does assembly or not...?

you are reading correct paul, I can put the whole thing together for you if you want, I just thought it would be easier for you to just get the housing and piece it together over time, then you are not dropping so much money all at once, then just bolt it in when it is complete

[1badrz28]

is this the Spring Street call out thread?

[old vette dog]

Been there done that not going back /\

[speedo]

is this the Spring Street call out thread?

Wooooo, just for that I am calling 1badz28 out...

Your street or mine..? Can you drive your car 2 hours to us hicks in the country...?

[ReRod]

Can you drive your car 2 hours to us hicks in the country...?

:rotfl:

[torkflight]

alright so is it gonna look all nice and purdy like the picture that speedo posted lol?

damn right, it will look just like the one in the projects section that I built for my car except it will have your spring perches and shock mounts and shit on it

[torkflight]

alright well i will have to start doing some research on internals. when will you have a price together on a housing?

I have been pricing out the tubeing for the axle tubes and I have to wait for some drawings to figure out how much laser cutting and forming will be, I am going to start on the fixture hopefully this weekend.

[whaisaturbo1000/rx7]

im going to kill franny. well not him personaly but ill try to kill his time.

[LES]

I have been pricing out the tubeing for the axle tubes and I have to wait for some drawings to figure out how much laser cutting and forming will be, I am going to start on the fixture hopefully this weekend.

who does your laser cutting and or forming??

I only ask because I am in the business, I also sell the steel.

Where do u get your tubes?? I can sell you those also.

[rx7v8]

im going to kill franny. well not him personaly but ill try to kill his time.

:rotfl:Good luck!!!! Dont bit off more then you can handle pal

[LES]

:rotfl:Good luck!!!! Dont bit off more then you can handle pal

IM your huckleberry RX7 boy.